1B130070 Customized Double 1/4'' Air Inlets Single Convoluted Industrial Air Springs
Specifications and Technical Parameters: 1B130070
| Model | 1B130070 Customized |
| Air inlet | Double, 1/4'' |
| Min. Height | 53mm |
| Max Height | 83mm |
| Design Height | 70mm |
| Full Stroke | 30mm |
| Rubber Bellow Diameter at 0.7MPA | 145mm |
| Cover Plate Diameter | 114mm |
| Mounting Threads On top pate and bottom plate | 2pcs x M10 |
| Screw center distance | 44.5mm |
| HS Code | 8708809000 |
| Type | Industrial Air Springs |
| Convoluted | Single |
Features
New product
Durable.
Directly replace the old or damaged one, easy to install.
Conforms to standard specifications and strictly follows factory quality control
About industrial air springs
Standard convoluted rubber bellows are actually made up of 4 layers. One layer of calendered rubber inner lining; one layer of cord reinforced rubber layer; another layer of cord reinforced rubber layer (the layer is connected by cords at a certain angle to the coupling layer); one layer of calendered rubber outer shell.
Rubber air springs are mainly used in the papermaking machinery industry for stroke adjustment and tension control in correctors, calenders, presses, scrapers, wires and other parts. In addition, they are also used in automobiles, trains, construction, and chemical industries, mechanism, installation, amusement park rides, packaging equipment, clutch systems, conveyor belts and scissor lifts, they also act as vibration insulators in centrifuges, commercial laundry machines, measuring and weighing machinery, and textile looms and military industry and other industries that require shock absorption, shock isolation and stroke control.
Components
1. Stud
A permanent part of the bead plate assembly used to attach the airspring to the suspension.
2. Combo Stud
Combination mounting stud and air fitting.
3. Blind Nut
A permanent part of the bead plate assembly providing an alternate mounting system to the stud.
4. Air Fitting Hole
A tapped hole usually 1/4" N.P.T. providing air entrance for the part.
5. Bead Plate
Permanently crimped onto the bellows at the factory allowing complete part leak testing prior to shipment.
6.Bellows
The heart of an Airide spring. Includes at least four plies, or layers, of material–an inner layer, two plies of cord-reinforced fabric, and an outer layer.
7. Bumper (Optional)
A solid molded rubber fail-safe device usedon many suspension applications. Prevents excessive damage to vehicle and suspension in the case of sudden air pressure loss.
8. Girdle Hoop
A ring between the convolutions of the convolutedtype air spring.
The 1B130070 Customized air spring pictures
Product Tags:
|
|
1B130070 Industrial Air Springs Customized Double 1/4'' Air Inlets Single Convoluted Images
|
