Industrial Air Springs Firestone W013587872 Contitech FT530-35 726 Triple Pneumatic Actuator For HENDRICKSON AUX. 004828
Cross Reference
Firestone style 333
Firestone W01-358-7872 / W01 358 7872 / W013587872
Firestone WO1-358-7872 / WO1 358 7872/ WO13587872
Contitech FT530-35 726 / FT 530-35 726 / FT 530 35 726 / FT530-35726/ FT53035726/65828
HENDRICKSON AUX. 004828
Specifications and Technical Parameters
| Max. OD | 15.9 / 404 mm |
| Min height | 4.0 / 102mm |
| Max height | 20.1 / 518 mm |
| Top/Bottom plate diameter | 11.31 / 287mm |
| Top plate studs/bolts qty | 1pcs combo studs, 1pcs studs/bolts |
| The center distance on top plate | 6.20 / 157.5mm |
| Bottom plate blind nuts qty | 4pcs |
| Bottom plate screw center distance | 5.56 / 141mm |
| Rubber bumper | Without |
| Girdle hoop | 2 pieces |
| HS Code | 8708809000 |
| Sample | Available |
| Applications | Industrial Mahines Or Others |
| Material | Rubber and Steel |
| Type | Triple Bellow Industrial Air Springs |
About air springs
Compared with other springs, air spring light weight, small internal friction, has good vibration isolation and noise attenuation ability in high frequency vibration, and air spring can achieve better variable stiffness characteristics by adjusting the internal pressure, when the load on the spring increases, the gas in the closed container is compressed, the pressure rises, the spring stiffness increases; On the contrary, when the load is reduced, the pressure of the gas in the container decreases and the spring stiffness decreases. Therefore, when the air spring is applied to the suspension of the vehicle, the natural frequency of the body can remain basically unchanged even if the load is different.
The bag air spring is composed of rubber air bag with curtain line and compressed air closed in it, which can be divided into single section and multi-section. The steel waist ring is designed between the section and section, so that there is no radial expansion in the middle part. At the same time, in order to prevent the friction between the two adjacent sections, the upper and lower cover plate of the air bag will be closed.
When we use air springs, we need to pay attention to the following points
1. Correct installation: industrial air spring shock absorbers need to be correctly installed, which needs to be consistent with the direction of installation and the working direction of mechanical equipment or vehicles.
2. Pressure setting: industrial air spring shock absorber needs to be set according to the actual load of mechanical equipment or vehicles. Too high or too low pressure will affect the damping effect and service life.
3. Maintenance: industrial air spring shock absorber needs regular maintenance, including cleaning, lubrication, replacement of seals, etc., to ensure its normal work and service life.
4. Temperature control: the working temperature range of industrial air spring shock absorber needs to be within the specified range. Too high or too low temperature will affect its damping effect and service life.
5. Safety inspection: industrial air spring shock absorbers need regular safety inspection, check whether there is damage or wear, if necessary, timely replacement or maintenance.
Industrial air springs photos
Product Tags:
|
|
Firestone W013587872 Industrial Air Springs Contitech FT530-35 726 Triple Pneumatic Actuator For HENDRICKSON AUX 004828 Images
|
