NORGREN M/31121 PARKER 9109044 Single Convoluted Industrial Suspension Air Springs
Cross Reference
Air spring supplier/competitor: NORGREN
supplier/competitor number: M/31121; M 31121; M 31121
Air spring supplier/competitor: PARKER
supplier/competitor number: 9109044
Air spring supplier/competitor: FIRESTONE
supplier/competitor number: W01-R58-4060; W01 R58 4060; W01R584060; WO1-R58-4060; WO1 R58 4060; WO1R584060
Air spring supplier/competitor: DUNLOP
supplier/competitor number: SP 1640；SP1640
Air spring supplier/competitor: DUNLOP PNEURIDE
supplier/competitor number: 12" x 1
Air spring supplier/competitor: CONTITECH
supplier/competitor number: FS 412-10 DS; FS412-10DSG1/2; FS 412 10 DS G1/2; 67962
Specifications and Detailed Technical Parameters:AIRSUSTECH 1B12X1
Top plate bolts/studs: 4pcs×M10
The screw center on top plate: 232mm
Bottom plate bolts/studs: 4pcs×M10
The screw center on bottom plate: 232mm
Top plate diameter: 260mm
Bottom plate diameter: 260mm
Air inlet/air fittings: G1/2
Rubber Bellow diameter: 300mm
Height: 130mm
Girdle hoop: Without/No
Working pressure≤0.7Mpa
Working medium: water, air, a small amount of oil
Fatigue test: ≥ 1 million times
Burst pressure: ≥2.0Mpa
Operation
Due to their flexible construction the mounting of Air Bellows is less critical than with conventional pneumatic cylinders, which normally require rigid fixing and guidance and provide only one axis within a limit of 15° between faces. Additionally the axial location of the end plates may be off set by up to 10 mm.
When pressurised Air Bellows will follow the line of leased resistance. Accordingly care must be taken with the mounting geometry in angled applications.
When depressurised Air Bellows will fit in to surprisingly small spaces, especially useful for clamping or moving awkwardly shaped or very heavy loads. In operation it is recommended that the unit is not allowed to "bottom out" or achieve its maximum height. Various mechanical devices may be employed to achieve this.
Applications
| Roller tensioning Hot foil stamping press Short stroke mechanical linkage Hopper vibration and damping Platform lift Machine isolation Scissor lift Mechanical handling stop |
Features
Air spring, commonly known as air bag, air bag cylinder, leather bag cylinder, air shocks, air spring assembly, air spring completer, rubber bellow, air suspension, air suspension bag, air supension spring, air balloon, air actuator, air pillow
Overload safe, Easy to limit force, Easy to vary speed, Reliabifity, Low installaton cost, Ease of servioe, Safety in dammp envirommments, Safety in explosive atmospheres, Safety risk with electrical, installations, Clean hygienic,Competitive purchase price, Long service life, Light weight, Lower noise level during operation
The related picture of 12×1
Product Tags:
|
|
Front Or Rear Suspension Air Springs NORGREN M/31121 PARKER 9109044 Images
|
